Click on the image to check the artwork
ZGSM series-KM outdoor LED street lights with the power from 60W to 120W;
Advantages
a. Fully aluminum alloy Die-casting case, stainless steel screws.
b. High transparency tempered glass
c. Smooth body with self-cleanness
d. High lamp luminous efficiency: up to 125 LM/W.
e. Toolless, the housing can be opened without tools.
f. Power turn off protector, protect the safety of personnel.
g. 10KV/20KV Surge Protection Device.
h. Imported breather, increase lamp service life.
i. Vertical and horizontal installation both available.
j. Variety of spectral types are optional for different road situation.
k. Meanwell HLG driver or Inventronics programmable driver
l. Enough space to extend the smart remote controller to support smart city
m. 7 years warranty for the whole light
Application
Roadway, street, path way, park, public square, parking lot, carpark, high way, Urban main roads
Description
The KM series street light use fully aluminum alloy Die-casting case which have better heat transfer. All of the screws on KM series street fixture are all stainless steel to resistant to corrosion.
The high transparency tempered glass be used in KM series street light to improve high system efficiency and effective protect the LEDs without any broken.
The smooth body design on the back of KM series street light can make the light no accumulation of dust and bird droppings with rain wash.
Through use the High efficiency Philips Luxeon 3030 2D LED chips, the system efficiency of KM series street light can up to 125lm/w.
With the snap lock, the street fixture can be opened without any tools. This design will be very convenient for maintain.
When people open the KM series street fixture, the power will be cut immediately since there have a power turn off protector mount on the end of driver input. This function can keep safety of personnel effectively.
In order to protect the KM series street fixture without any broken from surge, we add a surge protection device(SPD) on the end of driver input, it can resistant 10KV surges which possible come from power grid or thunder.
There have a imported breather both on driver box and led board box, with this breather, the inside and outside of street light can keep same air pressure, so there will be prevented the water leave inside the fixture.
KM series street light support both vertical installation and horizontal installation. The installation adjustable tilt angle can be 0-5-10-15°
KM series street light have three lens type can supply three light distribution to suit to different road width, pole distance, pole height and so on.
Normally, if non-dimmable version, we will use Meanwell high-end HLG series driver in KM series street light, if dimmable version, we will use Inventronics high-end programmable driver which integrate 0-10V,PWM and timer dimming and 6KV/10KV surge protection inside. It can provide excellent performance and lifetime.
Datasheet
|
Product |
ZGSM-LD60KM |
ZGSM-LD90KM |
ZGSM-LD120KM |
|
Nominal Wattage |
60W |
90W |
120W |
|
LED Qty &Current |
96 units &93 mA |
144 units &93 mA |
192 units &93 mA |
|
Input Voltage |
100-240V /277V AC 50 /60Hz |
||
|
Dimming |
0-5V, 0-10V, PWM, Timer |
||
|
LED Brand |
Philips Lumileds 3030 2D |
||
|
Driver Brand |
Non-dimmable: MeanWell HLG Driver | Dimmable: Inventronics Driver |
||
|
Max. Current @120V |
0.62A |
0.93A |
1.23A |
|
Max. Current @208V |
0.36A |
0.53A |
0.71A |
|
Max. Current @240V |
0.31A |
0.46A |
0.62A |
|
Max. Current @277V |
0.27A |
0.40A |
0.53A |
|
Operating Temperature |
-40 ºC to +50 ºC |
||
|
Power Factor(PF) |
>0.95 |
||
|
THD |
<20% |
||
|
Lumen Output (+/- 5%) |
7500 lm |
11250 lm |
15000 lm |
|
Luminaire efficacy (+/- 5%) |
125 lm /w |
125 lm /w |
125 lm /w |
|
Optic |
1M, 2M, 3M |
||
|
CRI |
＞70 |
||
|
CCT |
4000K (Nature White), 5000K (Pure White), 5700K (Cool White) |
||
|
Rating |
IP66, IK08 |
||
|
Material |
Die-cast aluminum; Tempered Glass |
||
|
Installation |
Horizontal and vertical both available; Adjustable tilt angle: 0-5-10-15º |
||
|
Accessories (Optional) |
Motion Sensor, Photocell(NEMA) |
||
|
Shell Color |
Light Grey or Deep Grey |
||
|
Lumen Maintenance |
> 75,000 hours-L₇₀ at 25 ºC |
||
|
Certifications |
CE, ROHS,CB,ENEC,LM80, ISO9001, ISO14001 |
||
|
Fixture Weight |
7.8 kg /17.2 lbs |
8.1 kg /17.6 lbs |
8.2 kg /18.1 lbs |
|
Packaging Weight |
9.8 kg /21.6 lbs |
10.1 kg /22.3 lbs |
10.2 kg /22.5 lbs |
|
Packaging Dimension |
785 X415 X205 mm /31.0 X16.3 X8.1 inches |
||
|
Packaging Type |
1 unit /ctn. |
||
Case studies
234pcs x 65W H series street light with 8 m pole in Ecuador